Geile Lok! Aus dem Grund besitze ich auch alle verfügbaren Repaint zu der Lok. ![]()
Kiskitrains ČSD 372 and DR 230
-
-
Das ist die schönste der Familie. Ich find die in dem Lack mega ansehnlich!
-
Hello, german railroad fans,
eshop Kiskitrains have been deactivated for a few days, as I´m switching to VAT payments for foreign customers. No my choice, but financial institutes in Slovakia. This change will also raise the prices a bit, as I have to compensate for VAT. Not much, but still.
Stay tuned

-
Myslím si, že je to v poriadku, najmä preto, že to otvorene komunikuje! Jasné vysvetlenia „prečo“ sú vždy lepšie ako akýkoľvek príbeh. S pozdravom, DennyW
-
Fellow german railroaders,
eshop is back and running. Thank you for your patience

Prices raised from 24 to 25€ and from 19 to 20€.
More products to come...
-
-
-
Gibt noch mehr bei https://ko-fi.com/s/654ac4abf1 und https://ko-fi.com/s/b45875418c und https://ko-fi.com/s/654ac4abf1
-
1 & 3 ist der selbe link
-
https://ko-fi.com/s/616ee60105 Da ist der dritte
-
Weiß jemand, wie man die Sammelmeldung ausmacht? Die, die kommt, nachdem man zu viel Leistung aufgeschaltet hat.
Ich habe alles probiert, aber nichts hat funktioniert. Eventuell weiß es ja jemand besser.
Does anyone know how to turn off the collective notification? The one that appears after too much power has been switched on.
I’ve tried everything, but nothing worked. Maybe someone here knows better.
@ kiski
-
-
Does anyone know how to turn off the collective notification? The one that appears after too much power has been switched on.
I’ve tried everything, but nothing worked. Maybe someone here knows better.
As usual, everything is in the manual. Upper signalisation blinking and audio siren can be stopped with Shift+End, and protection cancellation itself with Ctrl+End. Of course it assumes the protection is not active anymore. Your situation is a one-shot protection - once the main switch has been shot down, it is not active anymore, thus you can cancel it.
Or you can directly use Ctrl+End, so it will cancel protection and upper signalisation in the same time.
-
As usual, everything is in the manual. Upper signalisation blinking and audio siren can be stopped with Shift+End, and protection cancellation itself with Ctrl+End. Of course it assumes the protection is not active anymore. Your situation is a one-shot protection - once the main switch has been shot down, it is not active anymore, thus you can cancel it.
Or you can directly use Ctrl+End, so it will cancel protection and upper signalisation in the same time.
Thx very much, that actually helped.
The only thing i still have a problem with, is your light. It seems to be way to bright. Look at the Screenshots.
-
The only thing i still have a problem with, is your light. It seems to be way to bright. Look at the Screenshots.
They are as they are. Sorry, but I won´t modify them. They were tuned for night by someone who used to drive those beasts. Simply do not use them during the day, if it disturbs you, just use position lights. They were not intendet as the third position light in ČSD era as it is now, because in ČSD era such thing like the third position light didn´t exist.
-
-
If you have the same problem, then reslove it as i suggested for rayan
otherwise you do not have the same problem...If you have done everything as I suggested for him, and you still can´t turn the main switch on, then check the main reservoirs for air. You can´t turn the main switch on while on non-zero notch, and if you do not have enough air in reservoirs, you can´t notch down to zero. Then you must use emergency notch down function, tap down to zero notch and only after than you can turn the main switch ON. Of course, check for any additional air leakage, like emergency brake ventil is not opened, etc.
Emergency notch down function is available only when you´re stationary, in safe state (no main switch is on and no panto is raised) and you have non-zero notch (for example you´re on 7, check notch display for those). Keyboard shortcut should be Ctrl+Shift+I.
Here it is described in manual (no one reads that evidently)... -