Gerade kam Railtraction eine Mail, dass der Flirt3 auf V1.1 geupdatet wurde.
FLIRT3
========================= v1.1 Release Notes =========================
All: Ctrl-F9 and Ctrl-F10 now auto-repeat for changing destination boards
All: When handbrake is engaged, throttle should be locked or at least not be allowed to add power
All: Better speed control brake holding when going down long inclines - maintains speed much closer to target now
All: Default cab light to OFF
All: Turned down intensity of the blue in the MFDs
All: For modders - changing the blueprint Maximum value for the control “CruiseTargetSpeedIndicator” will allow the speed limiter to go higher than factory standard. Standard for NS/Rnet is 140. Standard for Süwex is 160. Making this value 200 will allow the cruise limiter to go up to 200km/h BUT the in-cab indicator will only go as high as the analog dial allows.
All: Added sand sprayers to front bogies
All: External cab textures now not luminous - cab is dark at night
NS: Added NS Logo to the nose
NS: Added 'door closed' light to main instrument panel in cab
NS: Added fictional destination “IJdam” to NS version
NS/Rnet: added cab light button on right console
NS/Rnet: Fixed analog speedometer needle to be more accurate
NS/Rnet: door closing sound to be the same as Suwex version.
Süwex: PZB pickup added to front bogie
Süwex: Fixed disappearing combination handle (would disappear when right at the bottom of the screen)
Süwex: Swapped red and yellow brake needles (were wrong way around)
Süwex: Changed PZB fully restrictive mode - 15 seconds below 10km/h. Does NOT automatically go into restrictive mode if you come to a stop, unless you’ve been stopped for more than 15 seconds.
All : Documentation updated to reflect all the above changes
