Kal000px Is there any chance that you could provide an update on when you expect your upcoming products to be released (if at all)? CD 750.7, CD 471, Vectron... just a rough estimation... Thanks a lot!
Beiträge von jstange
-
-
Kal000px I don't know...the advanced lever handling works fine for me. One question though, when I unapply all power there is sometimes a very small brake application shown on the left display (yellow stripe), although no brake is actually applied... is it a TS limitation, bug or is this prototypical?
Kal000px Hi, I'd like to again draw your attention to the bug above I reported a while back... don't think this was happening with v1.04 and earlier...
-
Ok, thanks a lot!
-
RalfK If I understood your last post correctly, you were able to make the lights work for locos where they work only when lens flares is enabled? Can you please post an example of what .bin file you edited and what exactly you changed inside?
Thanks a lot!
-
...when I unapply all power there is sometimes a very small brake application shown on the left display (yellow stripe), although no brake is actually applied... is it a TS limitation, bug or is this prototypical?
Kal000px F5 HUD actually confirms this... when power is unapplied, there is 1% dynamic brake automatically applied (that cannot be removed)... is anyone else getting the same? This is weird for coasting, not sure why the loco should have dynamic brake applied at all times (no matter how small the application is)... ?
It is not happening all the time, but quite often it does that...
-
Kal000px I don't know...the advanced lever handling works fine for me. One question though, when I unapply all power there is sometimes a very small brake application shown on the left display (yellow stripe), although no brake is actually applied... is it a TS limitation, bug or is this prototypical?
-
The new advanced lever manipulation is excellent, that's the way it should have been done from the start... works great with my joysticks. Thanks a lot!
P.S. If I may ask, any new info on the 750.7? Was hoping this one could make it before Christmas...
-
OK, thanks, I'll probably hold back then. It's not the first product I have where an update was promised and it never arrived. I remember watching some videos during spring and I didn't like the inside sound much. If you get used to the latest vR products or Linus' free sound updates (like the great BR189's) or even the recent Traxx has very good sound too, both inside and outside, it's hard to accept anything worse than that. Why spend time in a loco that is less pleasing to your ears than other products?
-
Given the current 3dzug sale I'd like to ask - has there been any sound update released for the 1216 yet as was planned? Thanks!
-
Great news indeed then (with the 750). Understand it's going to take time, but would be a great Christmas present for sure...
-
Hi Kal000px , I have not installed the 1.03 yet so should I hold back, are you planning to release the ETCS brake test fix soon?
Additionally, can you confirm the upcoming CD 750.7 release as payware in your shop?
-
Ah, that is probably it, I totally missed that... Thanks!
-
So after some time I returned back to this model and tried to run it on German railways for the first time. Oh oh oh...
Could someone please help me with how to enable PZB/LZB? I am using the fast startup, which I am afraid could be the problem... but I really hope one does not have to go through the full startup every time you want to drive...
I go to fast startup phase 3, the manual claims that all brake tests etc. should be done by now (except Mirel D1, which I don't need obviously). in the main display I choose the level to be PZB/LZB and then start putting in the "Zugdaten": choose ETCS, enter all data in, then it switches to LZB data, there I do the same, confirm with Wachsam and again with E. But absolutely nothing is happening on the display. I was watching some videos and the guy there get the usual LZB "B" on the display just by choosing the LZB/PZB level, but nothing like this happens to me. The only difference I see that the video was executing the full startup procedure...
Any help is greatly appreciated.
-
Wow, what a "nice" surprise... yesterday due to the 018 disappearance I was installing the loco multiple times using previous and the newest installer...now I that I want to install the "latest" 1.02 I am getting an error that my license key was activated too many times. This is certainly something I would not expect if you keep installing on the same PC... this means that an update installation is a new activation??
EDIT:
So choosing "Patch" instead of full installation seems to work. The bad news is that I was deleting the whole Kal000px content and chosing full installation every time I was patching before to be sure my installation was clean. Perhaps this is what caused it, but if so, it would be great to have a _big_ warning about this within the installer!!! Now I guess I won't be able to install the loco on my second PC when I finally get to it
Sent a message to the dev, hope it can be fixed.
-
Neu runterladen. Dann ist die 018 wieder da und die 019 weg.
Thanks! And I did not even need translation for the "019 weg" as the meaning of it is well known from the now world-famous "Merkel muss weg"
But seriously..yes, the version is still 1-02, but the file is different indeed. So everyone should redownload to be sure they have the latest version...
-
Kal000px Hi, did you remove the MT 386 018 from the main pack? I just performed full reinstall using the latest 1.02 and this one is missing...?
Indeed, the 018 was replaced by 019...? I liked the 018's plain look, is there a reason it was removed?
-
Actually it's not Czech, it's Slovak!!
But I agree at least some of the MIREL information could be included in the manual directly.
Kal000px Thanks a lot for the info, will try it out! Didn't occur to me that the simulation would be so precise that a real MIREL manual could be used as a guide!
EDIT:
Kal000px Hi, did you remove the MT 386 018 from the main pack? I just performed full reinstall using the latest 1.02 and this one is missing...?
-
Kal000px Hi, could you please advise how the Mirel test is done? I am using the fast startup, I am in phase 3, press Shift-6, the MIREL is in a D1 test state, but nothing else happens... is there anything else one must do?
As I have been using the fast startup till now, I realize the question is actually more general. The manual states, I quote:
"It is neccessary to do all function tests. First do all tests for safety systems (Mirel / ETCS)."
However it does not detail how to do this, only consequently how to perform the ETCS brake test. How can I execute the ETCS (and MIREL) functional tests? Thanks!
-
Kal000px Hi, could you please advise how the Mirel test is done? I am using the fast startup, I am in phase 3, press Shift-6, the MIREL is in a D1 test state, but nothing else happens... is there anything else one must do?
-
Kal000px As I said previously... if the reskin pack was changed it would be great to have some version info in the filename too
Is it necessary to download the repaint pack again since it was the case for the update before?
The size of the reskin pack file changed again so I guess the answer is yes...
