Beiträge von Peter749

Hello,

I'm having a problem with the Signals approaching Hof Hbf from the south direction - it might be me not fully understanding the signals

I have installed version 3.0 and the various assets required for this version

The Distant signal near kp 125.0 is showing Vr1

and when I reach the Main signal (A399) at kp 126.2 it is showing Hp1 and no restrictions

The line speed is 80kph and the HUD shows a drop to 60kph (about kp 126.35) but when you pass the Hp1 the line speed drops to 40kph with the train routed to Gleis 204

If the line speed dropped to 40kph I would expect Hp2 indication?

Thanks

Peter Heppenstall

I am disappointed with this loco from RSSLO

The way of creating a Dual loco by adding a separate Invisible Diesel section is lazy and causes the coupling problem

Master Key Simulations made the Class 73 Electro Diesel

https://store.steampowered.com…ss_460_Juniper_EMU_AddOn/

which works on both power modes without any extra bits required and the loco could couple normally.

Why RSSLO could not also do this I don't know.

Peter

Thank you

Peter

Hello,

Is there a guide to placing the LZB markers?

I had placed the LZB start on this route I'm editing but I'm unsure about the use of LZB End and LZB End fixed.

I'm using the markers from the Hamburg - Hannover route.

Thanks

Peter

Thank you - it is looking good

Hello,

Would it be possible to have a map of the lines the route will cover?
I can see from your videos that it runs Zurich to Olten via Lenzburg and Baden to Zurich
Does it also cover Rupperswil to Baden?

Please take your time with the testing as will be better in the long run

Peter

I have the new SimTrain SBB RAe TEE II and although there are some faults with it there is not another version available and to drive is not bad.

On the Gotthardbahn the train activates the "AWS" at Yellow Signals and the F3 HUD Alerter Icon lights but there is no sound and if you do not notice there is a Brake Application.
Also on the train is a Sifa which makes a sound until you cancel it.

Is there a way to have the "AWS" also make a sound at a Yellow Signal?
It could use the same audio file for the alerter.

Thanks

Peter

I worked out the problem - these coaches refer to the Kuju Railsimulator folder.

Which was fine for an older route but if you try placing the stock on a Newer route which does not need the ELAP the stock does not appear
Ticking the Kuju Railsimulator in the Assets box made the stock appear

The Readme only refers to using the Andi_M folder

Peter

For some reason the coaches would not appear on a Cloned version of the Test Trak

When I tried placing the coaches on a normal route the appeared as they should do.

Peter

I have the OBB Eurofima and it has been updated in 2017 which might be why the Reskins of the CD & DB Coaches don't work?

The Allgaubahn has Quick Drives - I don't know which others

Peter

Hello,

I Downloaded the Eurofima Wagen by Paul S. / Andi M. and have been using them for some time.
They are still on RW Austria
https://railworks-austria.at/i…rofimawagen-deutsche-bahn
https://railworks-austria.at/i…wagen/69-cd-eurofimawagen
And they were on Rail Sim.de but have now been removed - along with most passenger stock from the Downloads?

But since the update to TS 2019 these coaches do not work
They are in the Andi M > DB pick list but do not appear when trying to place on the track

Is there a fix for these coaches?

Thanks

Peter

And no platforms or station at Innsbruck Hbf

Peter

Thanks for the Quick Reply Markus

Peter

Zitat von Markus Schöbel

Unabgesehen von den passenden Bodentexturen haben sich bereits 2 weitere Überarbeitungen ( Berlin-Wittenberg und Köln-Düsseldorf ) in den Downloadbereich auf RWAustria eingefunden, sowie die Überarbeitungen der ersten 3 Pakete ( Texturen für die Holzweichen, sowie Fehlerkorrektur auf dem Dreiländereck ). Folgen werden noch das Paket für die RivieraLine und den Kuju-Ordner.

Hello,

Did the DB Tracks Update for the RSC Paddington - Oxford (Great Western Railway) get released?

Thanks

Peter

Thank you Markus & STS.

I had mistakenly installed the newer version of the signals 7.3.1 - downloading the 7.3 as trainman1 said above solved the problems and the signals now appear.

Thanks again

Peter

Hello,

I'm still having problems with some of the signals on this route
I downloaded the KS Signals 7.3 and installed them and the missing signals have appeared but the Signal Head has Missing Texture around it

It only appears to be on the section from Kreuztal to Altenhundem - the signals at Siegen and Kreuztal appear as they should.

RW Tools just says I'm missing some of the Kuju signals but not sure where they would have come from
I have had TS201x since TS2012 so I should not be missing basic files unless they came from another route/download

Thanks

Peter

Thank you Trainman1 and Binoo

Peter

Hello,

I have only recently downloaded this route which is much better than the old route
But I have some missing Signals
There is a link in the Readme for KS Signals on this forum
http://rail-sim.de/forum/wsif/…eutsche-KS-Signale-v-3-1/
But the link does not work ? [The link you are trying to reach is no longer available or invalid.]

Are these signals available elsewhere?

Thanks

Peter

Thanks Schwarzwaldbahner

Peter