TS-MFD Modulares Führerraumdisplay (MFD) inkl. EbuLa für Train Sim

    • available
    • vR loco's...

      the vr BR110 / 480 wittenberger steuerwagen has the MFA lamps ouput in the controller list... PZB_LM_85 and so on,

      But the vR BR120 and BR112.1 do not... i read on page 20.. that Maik Goltz said "Nein ist sie nicht. Sie basiert auf LM Steuerung mit Nodes und nicht als Controller."

      So... is there a way to read these 'nodes' ??

      I prefer to drive only vR loco's due to their amazing physics and operation, they are ideal to be driven with a home train driving desk where the MFA is on a seperate monitor.

      p.s, on the BR112.1 and i think ohter loco's the 'TAV status' lamp for the door locked T light.. it has a 3 position output on the controls list... 2 = on, 1 = flashing, and 0 = off.
      how would i set that up in the 'Tuer LM' entry on the lok Konfigurator?
    • ahh damn,

      The vR BR110 and it's 'Bnrbdzf' wittenberger steuerwagen have the data available too, things like 'PZB_LM_85' 'Sifa_LM' etc... i just need to work a bit more translating the list of "Bezeichung's" to "Controller Names" so i assign the correct items.


      However:
      My current favourite loco, the vR BR112.1 uses the 'nodes' it seems, as does the BR120 :(
      there has to be a way to get at that data...

      years ago i played a little with something called 'outgauge' which read the code of any game and found the bits that made gauge needles move and lights to come on... that was for then connecting real car instrument clusters to the game using an arduino... i did similar with my Omsi bus cab, but thankfully Omsi was written to allow easy access to all the games data with a simple .dll
      So maybe outgauge might be able to sniff out the 'nodes' data stream.


      I'm playing with the BR112.1's engine .bin files, trying to add bits of code from the BR110, changing the calls to ones i can read in the simulation .OUT file, in the hope i can find the triggers, i can get the 'new' control names to show in the Lok Konfigurator... but they dont do anything, So i don't think it will be that simple,

      I think there will need to be a bit of code that listens to the 'nodes' written, but i'm way out of my depth here,

      The most i managed to do was add an entry to the engine .bin files for the 'open doors' command, and then have a switch click sound assigned to it, so pressing the 'T' button is no longer silent, it clicks on and off then the doors open,


      One last thought... I use the 'TS 2017 raildriver and joystick interface' to control the trains from my driving desk and siatek throttle quadrant... that program reads the 'engine script . lua / out' files by modifying them a little, reading and then injecting code into them,
      i wonder if that's a way to get the data we want,

      It would be really nice if virtual railroads would write a little program to get the data out of their loco's for us... i'd happily pay for the upgrade to each of their loco's i own (i also wish they would update their older loco's, again i'd pay happily for the updates.
    • Thankyou, so it looks like some vR loco's wont be able to display fully working MFA's then :(

      i am using makeuseof.com/tag/get-immersiv…droid-apps-root-required/ to make my tablet hide the bottom navigation bar, it can also hide the top status bar (showing battery charge, wifi, time etc) but it shows a grey bar instead at the top... but using 'immersive mode' allows the EBula especially to look like it is a real unit rather than an app running on a teblet :)
      Werbung

      The post was edited 2 times, last by gazz ().

    • I'm really sorry to do this... but i am trying to translate the 'lok konfigurator' into english so i can work out what things i am looking for when assigning the control data to it, can someone have a look at this very long list, and correct where i've got it wrong, and give me ideas to the ones i have no idea about please??.

      i know that as i'm using only vR trains, a load of things in the konfigurator wont apply to my trains... i am seriousely thinking of getting the chris trains railjet as it looks to be the most advanced train yet for train simulator,

      P.S, i will be making a donation as soon as i get paid next week as this program is transforming how i play train simulator, and i'm sorry for all the questions.


      HAUPTSCHALTER = Main Switch / HS Aus Lamp
      SPANNUNG = Catenery Line Voltage i.e. 15Kv
      STROMABNEHMER STATUS = Pantograph up or down
      OBERSTROM = Traction Current
      BATTERIESPANNUNG = Battry Voltage
      EBULA DAY/NIGHT = EBula Button for day/night mode
      FUEHRERSTAND = *no idea* ???
      INSTRUMENTBELEUCHTUNG = Instrument Lights
      VIRTUAL BRAKE CONTROL = Train Brake Lever
      VIRTUAL THROTTLE CONTROL = Throttle Lever
      TEILNEHMER = *no idea* ??
      SYSTEM LAND = For Corss Border Trains, DE / Swiss power systems??


      ANZEIGEN
      RICHTUNGSSCHALTER = Direction Switch / Reverser
      ZUGKRAFTVORWAHL = Power Notch (i.e. BR110/111 steuerwagens, 0 - 28)
      BESCHLEUNIGUNGSMESSER = Accelerometer, for Dial next to Speedo, power and braking force.
      SPEEDOMETER = Train Speed / Speedometer
      SPEEDOMETER VSOLL = Line Speed Bug ? (For AFB / LZB??)
      DISPLAY VSOLL STELLER = *not sure* AFB ??
      AFB ON/OFF = Afb on/off
      TUER LM/TUER LM LINKS = T Lamp for Doors closed and locked
      TUER LM RECHTS = As above for trains with left and right door lights


      SIFA/PZB/LZB
      ZUGART = Train Catogory.. O / M / U ??
      SIFA AKTIV = Sifa on/off
      SIFA WEG = Sifa Lamp
      SIFA ZWANGSBREMSUNG = Sifa Emergency Braking Lamp??
      PZB STATUS = PZB Status??
      PZB AKTIV/LM BETREIB = PZB On/Off??
      PZB LM 85 BLACK = PZB 85 Lamp
      PZB LM 85 INVERT = PZB 85 Lamp off??
      PZB LM 70/1000HZ BLACK = PZB 70 Lamp *1000Hz Black*???
      PZB LM 70 INVERT = PZB 70 Lamp off??
      PZB LM 55 = PZB 55 Lamp
      PZB LM 55 INVERT = PZB 55 Lamp off?
      PZB LM 1000HZ =PZB 1000Hz Lamp
      PZB LM 1000HZ INVERT =PZB 1000Hz Lamp Off??
      PZB500HZ INVERT = PZB 500Hz Lamp off??
      PZB/LM 500HZ = PZB 500 Lamp
      PZB LM BEFEHL40 = PZB 40 - Befehl Lamp
      PZB RESTRIKTION = PZB 70 - 85 Lamps Flashing??
      PZB WACHSAMKEITASTE = PZB Wachsam Switch??
      PZB ZWANGBREMSUNG = PZB Forced Braking??
      LZB SIWTCH ON/OFF = LZB on/Off Switch
      LZB AKTIV/PANEL ON/OFF = LZB Status??
      LZB DISTANCE/ 1000ER = LZB Numbers Thousands?
      LZB DISTANCE 100ER = LZB Numbers Hundreds?
      LZB LED BALKEN = LZB LED strip for below 5km
      LZB ML B = LZB B Lamp
      LZB ML ENDE = LZB End Lamp
      LZB ML S =LZB S Lamp (not sure what for)
      LZB ML S_invert = LZB S LAmp Off??
      LZB ML G = LZB G Lamp
      LZB ML G_inv = LZB G Lamp Off??
      LZB ML H = H Lamp (not sure what for)
      LZB ML H Invert = LZB H Lamp Off?
      LZB ML UE = LZB U (with Umlauts) Lamp
      LZB ZIEL SPEED = LZB Target Speed??
      ORDER
      LZB ZIEL SPEED (100er) = LZB speed digits 100's
      LZB ZIEL SPEED (10er) = LZB Speed Digits 10's
      LZB ZIEL SPEED (1er) = LZB Speed Digits 1's


      BREMSEN
      LOK-BREMSZYLINDERDRUCK = Train Brake Cyclinder Pressure
      ZUG-BREMSZYLINDERDRUCK = Loco Brake Cyclinder Pressure
      HAUPTLUFTLEITUNGSDRUCK = Main Train Pipe Pressure
      HAUPTLUFTBEHAELTERLEITUNGSDRUCK = Main (Air Tank) Pressure
      FEDERSPEICHERBREMSE = Spring Brakes?? Parking Brake??
      HOHE ABBREMSUNG = Hohe Abbremsung Lamp
      BREMSART = *no idea*??

      BREMSTABELLE Table to adjust brake lever pressures??
    • I will try ;)

      HAUPTSCHALTER = Main Switch / HS Aus Lamp - correct
      SPANNUNG = Catenery Line Voltage i.e. 15Kv - correct
      STROMABNEHMER STATUS = Pantograph up or down - correct
      OBERSTROM = Traction Current (in ampere) - correct
      BATTERIESPANNUNG = Battry Voltage - correct
      EBULA DAY/NIGHT = EBula Button for day/night mode - correct
      FUEHRERSTAND = A locomative has a cab 1 and 2. This Controller(?) is set to 1 or 2 if you enter the locomotive at start (i think)
      INSTRUMENTBELEUCHTUNG = Instrument Lights - correct
      VIRTUAL BRAKE CONTROL = Train Brake Lever - correct
      VIRTUAL THROTTLE CONTROL = Throttle Lever - correct
      TEILNEHMER = I think that this has something to do with the Multiple-unit train control, when you have more locomotives.
      SYSTEM LAND = For Corss Border Trains, DE and for switzerland when there is a admission for this country - correct


      ANZEIGEN
      RICHTUNGSSCHALTER = Direction Switch / Reverser - correct
      ZUGKRAFTVORWAHL = Power Notch (i.e. BR110/111 steuerwagens, 0 - 28) - correct
      BESCHLEUNIGUNGSMESSER = Accelerometer, for Dial next to Speedo, power and braking force. - correct
      SPEEDOMETER = Train Speed / Speedometer - correct
      SPEEDOMETER VSOLL = Line Speed Bug ? (For AFB / LZB) - correct
      DISPLAY VSOLL STELLER = I think it's the same like speedometer vsoll but with displays not with a tachometer with needle and so on. It could also show the VSoll on another display
      AFB ON/OFF = Afb on/off - correct
      TUER LM/TUER LM LINKS = T Lamp for Doors closed and locked (on the left side) - correct
      TUER LM RECHTS = As above for trains with left and right door lights (on the right side) - correct


      SIFA/PZB/LZB
      ZUGART = Train Catogory.. O / M / U ?? - correct
      SIFA AKTIV = Sifa on/off - correct
      SIFA WEG = Sifa Lamp - correct
      SIFA ZWANGSBREMSUNG = Sifa Emergency Braking Lamp?? - correct
      PZB STATUS = PZB Status?? - correct
      PZB AKTIV/LM BETREIB = PZB On/Off?? - correct
      PZB LM 85 BLACK = PZB 85 Lamp (85 lamp black) - correct
      PZB LM 85 INVERT = PZB 85 Lamp off?? - I don't know. You can try to rename this control, start to drive the locomotive in the TS with PZB and keep an eye on missing lights in the PZB. When there is a missing light you know the usage of ... Invert
      PZB LM 70/1000HZ BLACK = PZB 70 Lamp *1000Hz Black*??? - correct
      PZB LM 70 INVERT = PZB 70 Lamp off?? - as above
      PZB LM 55 = PZB 55 Lamp - correct
      PZB LM 55 INVERT = PZB 55 Lamp off? - as above
      PZB LM 1000HZ =PZB 1000Hz Lamp - correct
      PZB LM 1000HZ INVERT =PZB 1000Hz Lamp Off?? - as above
      PZB500HZ INVERT = PZB 500Hz Lamp off?? - as above
      PZB/LM 500HZ = PZB 500 Lamp - correct
      PZB LM BEFEHL40 = PZB 40 - Befehl Lamp - correct
      PZB RESTRIKTION = PZB 70 - 85 Lamps Flashing?? (could also be the speed item on a train with displays. Like "VMAX = 45 km/h)
      PZB WACHSAMKEITASTE = PZB Wachsam Switch?? - correct
      PZB ZWANGBREMSUNG = PZB Forced Braking?? - correct (lamp i think)
      LZB SIWTCH ON/OFF = LZB on/Off Switch - correct
      LZB AKTIV/PANEL ON/OFF = LZB Status?? - It could also be the display for the meters (9900 meters maximum)
      LZB DISTANCE/ 1000ER = LZB Numbers Thousands? - correct
      LZB DISTANCE 100ER = LZB Numbers Hundreds? - correct
      LZB LED BALKEN = LZB LED strip for below 5km - could be, i don't have a vR loco with displays ^^
      LZB ML B = LZB B Lamp - correct
      LZB ML ENDE = LZB End Lamp - correct
      LZB ML S =LZB S Lamp (emergency brake (overspeeded))
      LZB ML S_invert = LZB S LAmp Off?? - correct (or like above)
      LZB ML G = LZB G Lamp - correct
      LZB ML G_inv = LZB G Lamp Off?? - correct (above)
      LZB ML H = H Lamp (run over a LZB stop or a red signal)
      LZB ML H Invert = LZB H Lamp Off? - correct (above)
      LZB ML UE = LZB U (with Umlauts) Lamp - correct
      LZB ZIEL SPEED = LZB Target Speed?? - correct
      ORDER
      LZB ZIEL SPEED (100er) = LZB speed digits 100's - correct
      LZB ZIEL SPEED (10er) = LZB Speed Digits 10's - correct
      LZB ZIEL SPEED (1er) = LZB Speed Digits 1's - correct


      BREMSEN
      LOK-BREMSZYLINDERDRUCK = Train Brake Cyclinder Pressure - I think this is the Loco Brake Cylinder Pressure
      ZUG-BREMSZYLINDERDRUCK = Loco Brake Cyclinder Pressure - I think this is the Train Brake Cylinder Pressure
      HAUPTLUFTLEITUNGSDRUCK = Main Train Pipe Pressure - correct
      HAUPTLUFTBEHAELTERLEITUNGSDRUCK = Main (Air Tank) Pressure - correct
      FEDERSPEICHERBREMSE = Spring Brakes?? Parking Brake?? - Parking Brake
      HOHE ABBREMSUNG = Hohe Abbremsung Lamp - correct
      BREMSART = depending on the braking percentage (Bremshunderstel), can be G, R, or P

      fahrweg.dbnetze.com/resource/b…a/rw_483-0202A01-data.pdf
    • Sofern ich den Kram auch mal mit ner neuen lok Konfig hinbekomme mach ich en Tutorial xD

      Aktuell bin ich wohl zu blöd so ne Lok Konfi zu machen.

      @Sillo - Auf Eurer Webseite fehlt das "Fahrplan" Tutorial. Ich wollte mal einen erstellen, aber die Uhrzeiten im EbuLa ändern sich dann immer - echt blöd. Wenn ich das System dann mal richtig verstanden habe, läuft es bestimmt auch...

      BTW @'Sillo' - geniale Umsetzung - dickes Lob und ein Mega Dank!!!
      Viele liebe Grüße,
      Roman

      The post was edited 2 times, last by romanchristmann ().

    • @romanchristmann
      Unter Einstellungen musst du den Haken bei "Fahrplanzeiten anpassen" rausnehmen, dann sollten sich die Fahrplanzeiten nicht mehr anpassen.

      Wenn ich wieder Zeit finde, dann werde ich das Tutorial noch erweitern. Du kannst gerne mitmachen. Ich gebe die die Zugangsrechte, wenn du möchtest.

      @nicolas83
      Welchen ICE meinst du, von Steam?
      Gruß SIlvio
      TS-MFD EbuLa-Display für TS 20xx
    • Ich meine die beiden ICE3 und den ICE-T die verfügbar sind. Das MFA funktioniert soweit bei beiden. PZB, AFB, Sifa etc. wird alles angezeigt. Nur der LZB Distanzbalken wird nicht korrekt angezeigt wenn man in der LZB fährt.

      Gruß Nicolas
      Werbung
    • Verbinde TS-MFD mit den TS, dein ICE sollte startbereit sein, öffne den Lokkonfig-Editor, warte bis er die Lokkonfig automatisch auswählt.
      Jetzt kannst du die neue Konfig importieren, auf Ja klicken und abspeichern. Somit ist deine Config überschrieben und sollte nach ein erneuten Stop/Start Server funktionieren.
      Gruß SIlvio
      TS-MFD EbuLa-Display für TS 20xx
      Werbung