This is a patch for SAD's standard german buffer stop, which don't has a correct collision box.
That means vehicles rolling against this buffer stop won't notice any obstacle and will therefore derail if rolling over the
end of this track. This will probably lead to an error message and therefore to an end of the running scenario.

With this patch the collision box of this buffer stop was corrected. It now works like excepted.

This new collision box was changed to fit all measures of any given vehicle, but some level of inaccuracy could not be prevented,
because not every vehicle has an accurate collision box itself.
The inaccuracy will be very small and should be in a range of +/- ~10 cm (~4 inches).
So sometimes the buffers of an vehicle will "dive" into the buffer stop or will stop before. This cannot be prevented because the
collision box of the used vehicle might be slightly inaccurate.

We tried to find a good value which should fit all needs.

I would like to thank "Holzlaender", who has analyzed, changed and tested the values of the collision box.
More tests were done by me, but because of Holzlaender's great work and precision no changes were necessary. Great work, dude!


Installation:
Because the original file "buffer01.bin" is in protected mode, the patch cannot be installed by the packet manager.
You will have to copy the file "buffer01.bin" to "/Assets/SAD/NetWork/buffer/" by hand.
The old file will then be overwritten.
You can make a backup of the old one by renaming it, if you want.
After installation you will have to clear the cache by choosing "Tools & Docs" and clicking on "clear cache" in the RailWorks
starting window. All of your routes and even future installations of routes which use this buffer stop will then use the new values.

Have Fun

Yours
Prellbock

Please visit http://www.rail-sim.de
